$2,320.00

Haltech Platinum Pro Plug-In ECU to suit Nissan 200SX S15 - SR20DET with M/T Only
[HAL-HT-055112]

h3>Haltech Platinum Pro Plug-In ECU to suit Nissan 200SX S15 - SR20DET with M/T Only.

*Check application details

Features:

  • Direct plug and play replacement of the OEM ECU, no re-wiring necessary
  • Uses the cars factory sensors
  • Supports Sequential Injection (peak and hold) and Direct fire ignition
  • Windows 2000, XP, Vista, Windows 7 compatible software
  • Real time programming, instant hesitation free adjustment while engine is running
  • Fully user definable 32 x 32 mapping
  • Tuning via Volumetric Efficiency (VE), Injection time or Lambda Correction (MAF)
  • Selectable onboard internal MAP sensor rated to 150kPa (up to 1.5 Bar or 22psi boost)
  • Wideband “auto tuning” using user definable target AFR table
  • USB and CAN Communication Port

Factory Outputs:

  • 4 x Fuel Injector outputs
  • 4 x Ignition outputs
  • Tacho, Boost Control, AC Clutch Relay, Idle Control
  • Thermo Fan, Check Engine Light, Fuel Pump (Variable Speed)
  • N-VCT (Nissan Variable CAM Timing Control)

Factory Inputs:

  • MAF sensor
  • Throttle position sensor
  • Knock detection sensor
  • Coolant temperature sensor
  • Vehicle speed sensor
  • Oxygen sensors

Expansion I/O*:

  • 2 x Analogue Voltage inputs
  • 2 x Analogue Temperature inputs
  • 4 x Digital pulsed outputs

*Optional auxiliary harness required to be purchased Haltech Part # HT040003

Functions:

  • Closed Loop O2 Control
  • Decel Cut Over Boost Rev Limiter
  • Closed & Open Loop Boost Control
  • Gear Setup
  • ACF On Base Tables
  • Transient Throttle Enhance

Correction Tables (Fuel, Ignition & Boost):

  • Cranking
  • Air Temp Target Correction
  • Coolant Temperature Correction
  • Map Correction
  • Zero Throttle Gear Correction
  • Cylinder Trim
  • TPS Correction
  • Generic Correction 1
  • Generic Correction 2
  • Gear Correction
  • Post Start
  • Air Temp Duty Correction
  • Post Start

Miscellaneous:

  • Data Logging: 448Kb of onboard data logging, storage for approx 40 minutes at 10 logs per seconds, 6 channels of data
  • Max 20 channels logging capability
  • Tune can be password protected in software
  • Rugged anodized aluminum casing

Power Requirements:

  • Source: 8.6 to 16.5 Volts DC
  • Consumption: 530mA @ 12Volts DC

Physical Dimensions:

  • Length: 154mm (174mm with MAP nipple)
  • Width: 158mm
  • Height: 42mm
  • Weight: 680g (1.5 lb)

The Kit includes:

  • Pro Plug-in ECU
  • USB Cable
  • Programming Software CD
  • Quick Start Guide
  • Instruction Manual (on CD)
Reviews
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
0 items
PayPal Accepted Here