Used to add CAN communications to G4+/G4X Plugin ECU’s which have a 5 Pin CAN connector. Plugs directly into the CAN socket on the ECU PCB. 12V and Ground via flying lead. Terminates to a DTM4 Male Connector which is compatible with other Link CAN accessories including the CAN Extension cable (CANEXT) and CAN Splitter Cable (CANTEE)

Suitable for powering a CAN Lambda, Dash, EGT amplifier or other similar low powered CAN devices which have a total continuous current draw of <3A. 

Specs: DTM4 Male to JST4. 12V and GND Terminated to JST4. Length 300mm 

DTM4 Pin Out:

• Pin 4: CAN H
• Pin 3: CAN L
• Pin 2: Ground
• Pin 1: 12V

Not compatible with the below PlugIns (these require a CANJST4 Cable):

• 214-4100 - PlugIn ECU G4X Nissan GTR with E-Throttle
• 217-4100 - PlugIn ECU G4X Nissan S15 with E-Throttle
• 233-4000 - PlugIn ECU G4X Honda S2000 AP1
• 228-4000 - PlugIn ECU G4X Subaru WRX V5-6
• 237-4000 - PlugIn ECU G4X Honda HC20X Type-R DC5/RSX
• 238-4000 - Plugin ECU G4X Subaru WRX11
• 239-4000 - Plugin ECU G4X MX5NB2X
• 240-4000 - Plugin ECU G4X MX5NB1X
• 243-4000 - Plugin ECU G4X WRX11 USDM